EN
In order to meet the demand for efficient handling of metal materials, more and more companies have begun to pay attention to the selection and maintenance of "excavator grabber attachments", especially in the field of "wheeled excavator grabber attachments", which are favored for their flexibility and efficiency.
一. Product features of wheeled excavator grabber attachments
"Wheeled excavator grabber attachments" is a professional device dedicated to grabbing and handling bulk or bundled metal materials such as metal scraps, steel bars, and iron blocks. Its core advantage lies in combining the mobility and flexibility of "grabbers" and "wheeled excavators", effectively adapting to complex sites and high-frequency operation scenarios, and improving metal loading and unloading efficiency.
1. Strong structural design
The attachment is made of high-strength wear-resistant steel, with strong structural rigidity and good impact resistance. Whether it is in a scrap steel processing site or in a port terminal, the "grabber wear-resistant steel structure" can resist the wear and deformation caused by continuous loading and unloading operations and extend its service life.
2. Multi-finger claw design, adaptable to a variety of materials
The "multi-finger steel grabber attachment" is usually equipped with 4 to 6 hydraulically driven claw arms, which can be flexibly opened and closed to adapt to irregularly shaped metal scraps. This design not only improves the grasping stability, but also reduces the material scattering during the unloading process, significantly improving the working efficiency.
3. Flexible installation and wide compatibility
Most "wheel excavator steel grabber attachments" support quick connection systems, which can be quickly connected and replaced with the host. Whether it is a 20-ton or 25-ton wheeled excavator, as long as the interface matches, "fast switching of attachments" can be achieved, significantly improving the flexibility of on-site equipment scheduling.
4. Efficient hydraulic control system
The attachment is equipped with a high-response hydraulic drive system, which is fast and synchronized, especially suitable for frequent start-stop and high-density operation requirements. After matching with a high-performance hydraulic pump and a multi-way valve control system, it can significantly improve the "steel grabber hydraulic control efficiency" and effectively reduce energy consumption.
2. Technical maintenance to ensure stable and efficient operation
In a high-intensity working environment, daily maintenance of the "wheel excavator gripper attachment" is essential. A scientific maintenance process can extend the life of the equipment and ensure stable operating efficiency.
1. Regular inspection of the hydraulic system
The hydraulic system is the core power source of the attachment. It is recommended to perform pressure testing and oil analysis on the "grabber hydraulic system" every month to prevent slow movement and unstable grasping due to abnormal oil temperature or leakage.
2. Lubrication and maintenance of the claw arm hinge point
Due to the large number of opening and closing movements of the multi-finger claw in high-frequency operations, its articulated bearings are very easy to wear. High-temperature grease should be added to the "grabber claw arm hinge point" regularly to avoid dry friction causing jamming or even breakage.
3. Clean up attachments and keep the structure clean
Metal materials often carry impurities such as oil, rust, and debris. Long-term attachment to the surface of the attachment may affect the structural strength. It is recommended to use a high-pressure water gun to clean the "attachment steel structure surface" after each shift to keep it clean.
4. Monitor the status of the electronic control unit
For steel gripper attachments equipped with intelligent control systems, the "electronic control unit status" should be checked regularly to ensure that the sensor and actuator are linked normally to avoid abnormal grasping due to control signal errors.
3. Practical advantages of improving metal loading and unloading efficiency
Correctly selecting and scientifically maintaining the "wheeled excavator steel gripper attachment" will bring the following significant efficiency improvements in metal loading and unloading operations.
1. Large operating radius and fast response speed
Compared with traditional crawler equipment, wheeled excavators have the characteristics of fast moving speed and wide operating range. After being equipped with steel gripper attachments, they can "quickly dispatch between multiple unloading points", significantly shortening the loading and unloading cycle.
2. Accurate grasping and reduced loss
Thanks to the support of hydraulic control accuracy and intelligent grasping system, the "grasping accuracy of steel gripper attachments" has been greatly improved, which can accurately locate the metal stacking position and reduce the secondary handling or falling loss of materials.
3. Reduced work intensity and improved safety
The operation of the steel grabber adopts remote hydraulic control, which greatly reduces the risk of operators directly contacting metal scraps, especially in "high temperature and high dust scenarios", effectively ensuring the safety of personnel operations.
4. Better energy utilization efficiency
The "energy-saving hydraulic system" design enables the steel grabber to reduce system energy consumption while maintaining high grip output. Compared with the traditional manipulator operation mode, the energy consumption per unit time is reduced by 10%-15%, which is more in line with green production requirements.
5. Matters to note when selecting steel grabber attachments
During the procurement and selection process, enterprises should focus on the following key indicators to match their own operation needs:
Match the dead weight of the attachment with the carrying capacity of the excavator: prevent the equipment from tilting forward or the operation from being unstable;
The grip range is adapted to the operation object: for example, "multi-finger attachments for scrap steel grabbing" should have high closing force;
The quality of wear-resistant materials and the strength of the claw tip: directly affect the service life of the attachment;
Whether to support the "intelligent control interface" docking: provide possibilities for later digital operation and maintenance.
6. Outlook on future development trends
As the trend of industrial automation and intelligence accelerates, "wheeled excavator steel grabber attachments" are also evolving. In the future, more advanced functions such as "AI identification of metal materials" and "automatic planning of grabbing paths" will be applied, combined with 5G remote control technology, to achieve more efficient and safer metal material loading and unloading operations.
Through a comprehensive understanding of "wheeled excavator steel grabber attachments", it is not difficult to find that it not only has significant advantages in structural design and functional performance, but also greatly improves the loading and unloading efficiency of metal materials through scientific technical maintenance and reasonable selection.
Choose BONOVO for high-quality, customizable excavator and loader attachments. We provide professional solutions to help you easily handle all types of earthmoving projects. Contact us now to learn more about our products!
