EN
Skid steer tree spade attachment: Professional equipment to drive the efficiency upgrade of nursery and garden construction
When implementing municipal greening, commercial nursery operations and ecological restoration projects, whether the tree transplantation is done well and quickly directly affects whether the project can be carried out as planned, and whether the trees can survive.
The tree spade attachment is exquisitely designed and can be used with many equipment, which just solves the two major problems of root ball protection and operation efficiency. As one of the best, the tree spadeattachment for skid steer provides a lot of help for professional construction.
Structural design and performance parameter analysis
The skid steer tree spade attachment is made of high-strength wear-resistant alloy steel, which makes it particularly wear-resistant and has a stable structure.
Its blade is curved, and the four blades work together to evenly disperse the force during digging, so as not to hurt the roots of the trees too much.
Coupled with the static pressure hydraulic cutting technology, the root ball is digging steadily and accurately, and the possibility of survival of the tree after transplantation is much greater.
In terms of performance, the tree spade skid steer attachment can handle trees with a trunk as thick as 150 mm.
The excavated root ball is 600 mm wide at the top, 300 mm narrow at the bottom, 450 mm deep, and has a volume of about 0.1 cubic meters. The device itself weighs about 830 kg.
These features allow it to be used in most tree species and soil environments, and can meet the various needs of nurseries and garden construction.
In terms of durability, the tree spade attachment has been reinforced.
After testing, it can work stably for more than 100,000 times, and it can withstand high-intensity and long-term work. In this way, the number of maintenance is reduced and the cost is reduced.
Equipment compatibility and application scenario expansion
The skid steer tree spade attachment produced by BONOVO is specially tailored for mainstream skid steer loaders and can perfectly match equipment from brands such as Bobcat, Caterpillar, Komatsu, Case, and Volvo.
No matter which brand of skid steer you use on site, BONOVO's tree spade can be easily assembled, truly realizing "one machine for multiple uses", providing great flexibility and convenience for contractors and construction teams.
In this way, equipment scheduling is more flexible, construction efficiency is naturally improved, and the trouble caused by brand incompatibility is eliminated.
Whether you buy it or choose the tree spade attachment for skid steer rental, it can meet the needs of projects of different sizes.
It can efficiently complete the transplantation of trees on the streets in the city; it can be of great help in the transplantation of a large number of seedlings in commercial nurseries; it can also provide reliable support for the reconstruction of vegetation in large-scale ecological restoration projects.
Even when creating landscapes in golf courses and resorts, it is necessary to move trees to designated locations accurately, and it can do the job, becoming an indispensable helper in construction in various professional fields.
Standardized installation and standardized operation guide
Before installation, you must first look at the hydraulic system of the skid loader. The flow rate should be between 20 and 30 gallons per minute. This is the basic requirement for the normal operation of the tree spade attachment for skid steer.
When connecting the hydraulic hose, the joint must be tightened and there must be no oil leakage.
During installation, use the quick connection device on the machine to lock the tree spade so that it can be safe and stable during operation.
After installation, try the machine empty first to see if the blade moves smoothly, whether there is any jamming or strange sound.
After confirming that there is no problem, adjust the angle of the blade and the depth of digging according to the size of the tree and the condition of the soil to ensure that the root ball can be dug out completely.
During operation, it is best to push the blade one by one, and don't dig too deep at once to avoid damaging the roots of the tree.
When moving a tree, use a strap to secure the trunk to prevent the tree from tilting or shaking.
In addition, try not to work in places with many stones or muddy ground, which can reduce the wear of the tree spade skid steer attachment and last longer.
Maintenance and performance guarantee strategy
To keep the tree spade attachment in good performance and use it for a longer time, daily maintenance is very important.
After each use, clean up the dirt and debris on it quickly, otherwise it will easily rust and corrode.
Always check whether the hydraulic oil is sufficient, whether the hose is broken or leaking, and deal with the problem immediately.
The sharpness of the blade directly affects the efficiency and integrity of digging the root ball.
So check the blade frequently. If it is worn out, replace it quickly.
For those moving parts on the equipment, add some grease regularly to make them move more flexibly.
The hydraulic filter should also be replaced on time so that the hydraulic system can work stably and the skid steer tree spade attachment can always work efficiently.
In addition, do not dig more than 450 mm deep, and the rhythm of work should be well controlled, which can reduce the wear of the blade and the machine, make the operation more efficient, and maximize the role of the tree spade attachment for skid steer.
Comprehensive evaluation and application value
The tree spade skid steer attachment is professionally designed, durable, and can be used with many equipment. It is an indispensable and important equipment in nurseries and garden construction.
Whether it is moving trees for greening in the city or large-scale ecological restoration, it can ensure safe and efficient operations.
As long as it is installed according to the standard and maintained well, the tree spade attachment can give full play to its role, help the project to be completed smoothly, and promote the garden construction industry to develop in a more efficient and professional direction.
FAQ
1.How big a tree is this skid loader tree spade attachment suitable for transplanting?
Designed for small to medium-sized trees, this tree spade attachment can easily handle plants with a maximum trunk diameter of 150mm. The root ball formed is a standard cone with a top diameter of 600mm, a bottom diameter of 300mm, a depth of 450mm, and an overall volume of approximately 0.1m³. This structure helps to keep the root system intact and improve survival rate.
2.What models of skid steers is it compatible with?
This skid steer tree spade attachment is highly compatible and is suitable for mainstream brands on the market such as Bobcat, CAT, CASE, Komatsu and Volvo. As long as the skid steer loader has a hydraulic flow of between 20-30 gpm and is equipped with a standard quick-change system, it can be smoothly connected and used.
3.Is equipment rental worth it?
For temporary or seasonal projects, such as urban greening or nursery replanting, the tree spade attachment for skid steer rental is a very economical choice. Not only does it reduce equipment investment, but it can also flexibly allocate resources according to the scale of the project.
4.How to reduce damage to tree roots during use?
It is recommended to use a segmented blade push method to avoid cutting too deep at one time. At the same time, the use of a four-blade curved blade design can disperse the pressure more evenly and reduce the risk of root damage. After cutting, use straps to reinforce the trunk position to ensure that it is stable and does not shake during transportation.
5.What should be paid attention to during routine maintenance?
After each use, the mud and sand on the blades and hydraulic components should be cleaned, and the hydraulic hoses should be checked regularly for aging or leakage. If the blade is obviously worn, it should be replaced in time. It is recommended to inspect the reinforcement components once a day before operation to ensure that the 830kg equipment can still operate stably under high-intensity cycles.