The Excavator accessories computer display screen can see data such as pressure, current, and voltage of the hydraulic system, but the displayed pressure values cannot reflect the process of pressure rise in various parts of the hydraulic system. By ...
Read More
When the excavator is working, whether its action is slow or not will directly affect its work effect. If the action is fast, the work efficiency is higher, and if the action is slow, the efficiency is lower. So, in the process of using it, we need t...
Read More
1. Connect the main engine to the included snowplow body by quickly changing the connection. The lock pin of the quick change joint must be inserted into the pin hole of the snowplow bracket. The lever must be fully pressed and locked. 2, when connec...
Read More
The automatic fall of the boom is a shortcoming often encountered in the use of wheeled loaders. The loader often works under the condition of automatic fall of the boom, which will not only make the loader work with low power, the hydraulic oil temp...
Read More
Nitrogen for the hammer, like an aphrodisiac, can greatly enhance the hammer's striking power. If nitrogen is not added enough, the crusher is weak, nitrogen is added too much, and the crushing hammer cannot work. Therefore, when using the crushing h...
Read More
There are three loading and unloading methods of loaders, loaders are: front unloading, rotary unloading and post unloading. Let's talk specifically about the three loading and unloading methods of loaders. 1. Loader front unloading type: simple stru...
Read More
Replacing the air filter element is a more important level for the maintenance of small excavators. The air filter element is a more important level for the air to enter the small excavator and the engine. Its primary effect is to filter the impuriti...
Read More
What causes the loader parts to run off after braking There are many loader accessories, and various parts, including easy to lose parts, belong to the loader accessories. Such as combined instrument, loader head, loader seat, water block, loader acc...
Read More
The common screws on the crushing hammer are the whole body bolts, splint bolts, high pressure pack fastening screws, external displacement valve fixing screws and so on. The importance of screws is no less than the key parts of the machine, because ...
Read More
White smoke 1, the white smoke is mostly caused by the cylinder water, please check the diesel inside there is no water, generally after starting the white smoke time is very short, the engine is no problem; 2. If the excavator starts white smoke, th...
Read More
The micro-excavator should clean the oil tank before refueling and replacement, leaving residual oil and impurities. The residual oil retained at the bottom of the tank by the micro excavator is connected to the bottom of the 19.6 ~ 29.4kpa compresse...
Read More
1. Hydraulic unloading, convenient and time-saving; 2. Using solid tires with tapered roller bearings inside, the tires are not only wear-resistant but also able to withstand larger radial and axial forces; 3. The height of the brush is adjusted by t...
Read More
Hot News2024-09-18
2024-09-18
2024-07-03
2024-03-08
2024-03-08
2024-03-08
EN
